SANY DTU90 Rubber for Paver Knowledge sharing: When paver works, the adhesion force is achieved by friction between rubber and ground on the track board. When turning, it is realized by the difference of walking speed between the two sides of the track. When the track board transversely displaces in the turning process, it produces very large friction force with the ground. If the strength or deformation ability of rubber is not enough, the track board will be seriously damaged, for example. Wear, tear, etc. When hot mix asphalt mixture is paved in summer, the increase of ambient temperature leads to the decrease of rubber deformation ability, and the damage situation is more serious at this time.

Here's a simple answer to your doubts about paver accessories:

Q: SANY DTU90 Rubber for Paver3?

Answer: 1. The connection size and surface hardness of the trackboard steel plate and plywood meet the relevant industry standards. There are no cracks in the forging of the steel plate.

2. Fine processing: each batch of products have chemical analysis reports, tracked steel plate after paint treatment, joint surface processing flat

3. Perfect design: The rubber used on the rubber sheet is oil-resistant, asphalt-resistant, corrosion-resistant, diesel oil-resistant and wear-resistant. There are no cracks in the rubber sheet and local shedding phenomenon.

Question: How to do the daily technical maintenance of paver?

Answer: (1) Clean paver: remove the accumulated mud, clay and asphalt on the surface of paver; remove dust and grease on the surface of engine, hydraulic components and other components. Be careful not to get dirt into the filling ports and air filters.

(2) Check the nozzles, connecting pipes, gas tanks and switches of the heating system.

(3) Check the connection and tightening of all parts of the paver, especially whether the connecting bolts of the left and right track beams and frame, ironing plate, dividing device and scraper conveyor are loose or broken, and tighten or replace them when necessary.

Q: Is the quality of mechanical parts guaranteed in your company?

Answer: The accessories sold by our company are all guaranteed for one year. The quality of imported and original products is absolutely reliable. You can call our hotline to answer your questions in detail.