SANY DTU95C Paver Rubber Pad 

Knowledge sharing: Users should choose standard equipment and series equipment as far as possible. The advantage of doing so is easy to familiarize themselves with equipment, easy maintenance service and spare parts reserve, which can significantly reduce the use cost of milling machines. The engine, mechanical transmission system, milling principle, working system, hydraulic components, control mechanism and tire of the series milling machine have a high degree of generalization, which can greatly reduce the stock of spare parts. The operation, maintenance and maintenance methods of the series milling machine have great similarities. After being familiar with a kind of milling machine, drivers and maintenance personnel can easily handle it. Grasp other specifications of the same series of milling machine, greatly improve the efficiency of work.

Here's a simple answer to your doubts about milling machine accessories:

Question: How to deal with the whole Caterpillar board of the old Trinity DTU95C paver?

Answer: Specific treatment method: After debonding, chemical treatment is first carried out on the joint surface of workpiece and rubber, that is, rust removal by soaking in formic acid, and then grinding with grinding wheel (conditional grinding machine can be used for grinding operation). When grinding, attention should be paid to ensuring the smooth degree of the joint surface and the grinding quantity should be as small as possible, and no rust can be found on the joint surface after treatment. The workpiece is then cleaned with gasoline, dried and coated with adhesives. Because the performance of the adhesive is very important for the combination of workpiece and rubber, after careful investigation and demonstration and market investigation, we finally decided to choose the Kemlock adhesive produced by the United States and Shanghai, which is specially used for the bonding of metal and rubber and has good bonding performance. According to the instructions, first use 205 bottom, then coat 202 after 35 minutes, keep 40 minutes, then send into the vulcanizing machine internal pressure moulding. Special attention should be paid to ensuring environmental cleanliness and strictly prohibiting pollution in the process of coating adhesives.

Q: Why should I trust you?

Answer: Our company has a professional business license. It has been engaged in the maintenance of engineering machinery and equipment and the supply of spare parts for more than ten years. It is also well-known in the industry. We have established long-term and good business partnership with people from all walks of life. Our repeat customers are more than one or two.

Q: Why do I have to buy from you right now? Why can't I put it off until later?

Answer: I believe you know more about construction machinery than we do. Procrastination will only hurt the machine more, so the cost of maintenance will be higher. In addition, if the machine breaks down and is not repaired in time, it will also affect the progress of the project. If there are any major problems with the machine, you can also prepare the goods first to avoid unexpected situations and affect the progress of the project, and our company has special activities during this period, why don't you buy the fragile parts first when the price is low, so as to reserve them for later use?