Excavator fuel economy skills, you know a few    

Using excavators all know that fuel-efficient machine is a good machine, but you know, the engine hand technology is good, can also save oil? How to operate to maximize the oil? Look at the following several ways, the machine owners can teach the machine hand method, if you are a robot hand, you can learn yourself.

1, minimize engine idling

In idle running, the hydraulic pump will still have oil in the cycle and fuel consumption. So, in the daily loading or mining process, halfway can work longer downtime, do not open the machine idle "waiting".

2, do not overload pressure drop

When the mining of sand or stone overload, digging machine will fall into the pressure drop form. Assuming that 6 minutes in 1 hours of 10 days is the form of pressure drop, then, if you can avoid pressure drop, you can throttle about 840 liters of diesel per year. A shovel handle the problem, can be divided into two down, or both for the machine, and fuel, he.

3, reduce engine speed

Although the engine throttle is placed in the economic position, although reducing engine speed will affect the amount of operation, but it can greatly reduce the fuel consumption and improve the efficiency of fuel consumption.

4, reduce the angle of rotation

Reducing the circling angle when loading the dump truck can shorten the operation cycle, add the amount of work in the unit time, and then increase the burnup efficiency. This is also one of the most useful fuel saving methods.

5, reduce engine speed while walking

The faster the engine goes, the more fuel it consumes when walking.

6, high level mining

The excavator operating platform is the most effective when it is the same height or slightly higher than the truck.

7, when the bucket cylinder and connecting rod, bucket rod, cylinder and bucket are 90 degrees

Each cylinder pushes the excavator to the maximum power. When you start digging, don't extend the bucket to the maximum range, and start from about 80%, the best effect.

8, bucket digging range

The angle of the bucket is from 45 degrees to 30 degrees from the inside. Slightly different from the depth of excavation, but roughly within the scope of the operation of the arm and bucket, and should not be operated to the end of the cylinder stroke.

9, when digging trenches

First dig and dig the sides of the trench, then dig the middle part. You can save a lot of things in the middle, and save your energy.

10, the smaller the digging depth, the better the economic type of mining

Try to use sublevel mining method, divided into three layer mining, if a dig from the low ceiling, the first is the scope to increase the second power increase because the scope of excavator is reduced, reducing the work efficiency, it costs a lot of oil.

Everywhere there is life science, using your ability and cleverness can let you work more brilliance.