How do the diesel engine boil lonking loaders?

"Boil" refers to the loader engine temperature is too high, the cooling fluid in the water tank boiling, steaming phenomenon. The diesel engine "boil" causes and prevention and elimination methods are:

Radiator heat sink (core) inner wall fouling too thick, affecting heat dissipation. In use, attention should be paid to clean cooling water, and regularly remove the scale in the water tank;

Two radiator or cooling system leaks, resulting in insufficient coolant. Check the cause of water leakage and add enough cooling water after troubleshooting;

Three. The cylinder pad or cylinder liner damage, high pressure gas cylinder into the water cooling system, leading to "bubble" tank "boil" (more, this kind of situation

Emulsification of diesel engine oil. The cylinder gasket or cylinder liner shall be damaged and replaced if necessary;

Four. Water pump damage, cooling water is not cycle or circulation strength is insufficient. Check the cause of the water pump damage and replace the new pump when necessary;

Five. The machine high work load for a long time, the fan belt is too loose, the wind is not strong, also can appear because of overheating and boiling phenomenon. The working load of loaders should be properly arranged to prevent overheating.

Six. Thermostat damage, resulting in large circulation can not open, causing overheating of the machine, you should replace thermostat.

It should be noted that the loader in the alpine region will appear in the boiling phenomenon, the main reason for the radiator coolant to freeze cycle. Therefore, in the cold areas using loaders, attention should be paid to the radiator at the front of the insulation device.