How to install and debug sand washing machine?    

Sand washing machine is a kind of equipment in the manufacturing industry, which is used to remove impurities in sand products. It is the Central Asia equipment in the sand making line. So today we want to talk about how to carry out the sand washing machine installation and commissioning.

Sand washing machine is mainly used in the construction site, sand plant and hydropower site, a large number of gravel desliming, screening operations, can also be used in ore sorting operations. Below we understand the sand washing machine before the formal operation must be properly installed and debugging.

First understand the working principle of sand washing machine:

Sand washing machine to work when the motor gear reducer drives the impeller rotates slowly through the belt, reducer, and gravel from the feed chute into the washing tank, rolling in the impeller drive, another slight collision, remove the gravel covered surface impurities, while destruction of water vapor - coated sand layer, in order to facilitate the dehydration. At the same time, the water is added to form a strong flow, and the impurities and small proportion of foreign bodies are taken away in time, and discharged from the overflow outlet washing tank to complete the cleaning operation. Clean sand and gravel is taken away by the blades, and finally, the sand is poured into the chute from the rotating impeller to finish the sand washing operation.

1, after the equipment arrived, the user should immediately check whether the components are complete, whether or not damaged. After the machine is complete and undamaged, it can be installed.

2. Users should design the foundation construction drawings of sand washing machine according to the specific conditions of the field, and install the sand washing machine firmly on the basis of the concrete.

3, the installation must be in accordance with the requirements of the installation drawings sand washing machine to ensure the installation of the tilt angle.

4. The motor of the sand washing machine is installed on the guide rail so as to adjust the tightness of the belt, and the belt pulley and the motor pulley should be parallel in installation.

5, according to the above requirements adjusted, turn the rotor disc a few times, to check whether the device stuck, collision phenomenon.

Sand washing machine is the last process in the sand production line, and the main function is to clean the impurities and foreign bodies in the sand and gravel. The good installation and commissioning before the commissioning is the guarantee of the quality of the sand and gravel production. The Red Star Machine wishes the new and old customers all smooth sailing in the mining industry and make brilliant achievements.