How to store construction machinery correctly       

How to properly store is engineering machinery and engineering machinery operator should master the knowledge. Especially a lot of engineering machinery may be a long time can not use

Or, a project needs to be done, these mechanical equipment stored for a long time. Then how to correct the engineering machinery need long-term storage has become an important problem, so how to save the engineering machinery in the long-term anti? How to maintain the storage period of the equipment, so they use does not affect the future.

Correct storage mode of construction machinery:

1. should be parked in a dry room. Have to stop the outdoors, or flat ground and lay on board. Parking is used after cover cover.

2. before long-term storage, the machine must be maintained, repaired damaged parts, and its thorough cleaning, maintain good technical condition.

3. to stop the airport arrangement and layout, should ensure that any one mechanical access from other machines.

4. keep the fuel control lever in the idle position, the control lever in the neutral position.

5. engine storage. Let go of the cooling water in the engine. Replace engine oil. New oil is usually neutral, will not corrode metal parts of the engine. The fuel tank fill diesel fuel tank, avoid rust. Preservatives should be added if the conditions permit. The engine should be started once a month during the shutdown, so that the machine can travel at a short distance, so that the lubrication of the parts can be set up to prevent the rust. It should be noted that, before initiating should fill the cooling water, cooling water should be put at the end.

Storage of 6. battery. Should remove the battery, the battery will be placed in a dry place and antifreeze. To keep the surface clean and dry, do not place conductive objects in the battery. When the battery is disassembled, the negative electrode should be cut off first, then the positive line should be cut off; the positive line should be connected first, and then the negative electrode line should be connected. For engineering machinery electrical systems are the negative electrode, this is to prevent disassembling battery when short circuited. Lead acid battery should be charged once a month.

7. anti rust treatment. The store front, should be considered the outer surface of the antirust paint paint falls off to determine the size of the area is to repair or use the machine to paint with paint way,. The working equipment of construction machinery, such as the screed of paver, bucket of loader, scraper of grader, etc., is the rust proof method for metal exposed area.