How to use the sprinkling pump of vibratory roller
The quality of the sprinkling pump of the vibratory roller directly affects the compaction quality, the progress and efficiency of the project construction.
In recent years, more and more failures of the sprinkler system, directly affects the compaction performance of vibratory roller, so we sprinkler pump market feedback is decomposed, analysis and research, and find out the reasons for the damage is more intuitive, and finally the pump damage is the main reason for poor waterproof pump.
How to use the sprinkling pump of vibratory roller
So, for this analysis, we have done the following work:
1) change the ventilation capacity of the pump on the double roller vibratory roller, keep away from the wet environment, draw out the water outlet of the water tank, avoid splashing when waterproof, and ensure the operation of the pump in the condition of drying and good ventilation;
2) in the environment can not change or structure restrictions, should choose a new type of water pump, improve the waterproof and antirust ability of water pump, adapt to the use of double roller vibratory roller contact environment:
Sprinkler pump use points for attention:
A: when the test run, the pump should be filled with liquid, in order to prevent mechanical seal dry friction damage
B: the suction port of the pump should be immersed in the liquid level 30cm, to prevent air inhalation. The filter screen of the suction pipe can not be too dense, not to plug
How to use the sprinkling pump of vibratory roller
C: in the normal self-priming height, when the pump started 2 minutes after it has not been sucked, immediately stop running the pump, if the pump is not leaking, it is the pump inlet pipeline leakage or blockage, please check and confirm, take appropriate measures and then run the pump
D: strict inspection of the installation of suction line, never allow the suction pipe in the presence of leakage phenomenon, otherwise it can not suck
How to use the sprinkling pump of vibratory roller
E: low temperature season, the pump should not work in the pump liquid discharged by the discharging valve, split box Dynapac CA1300D roller pump manufacturers spot, to prevent the quality assurance, there are quality problems within one year, immediately returned, let you buy the rest assured, comfortable using, welcome to buy!
Wonderful recommendation:
John: Heroes, regardless of gender
31 "cross-border new products" mixing truck pump the world's first flower Hunan
