Lind HPV105 hydraulic pump

Lind used HPV105 hydraulic pump hydraulic hydraulic oil supplier knowledge: Vickers piston pump can be used for many types of work. In addition to the typical petroleum based hydraulic oil and synthetic hydraulic oil, it can also adapt to the aqueous hydraulic fluid and phosphatidic acid hydraulic fluid.

In the use of paver, how to do the maintenance of the hydraulic system?

In the use of paver, do a good job in the maintenance of hydraulic systems, can greatly reduce the failure. General attention should be paid to the following points:

The hydraulic oil in the hydraulic oil tank before entering, should be used to clean containers of oil, hydraulic oil filter oil filter should be added after the hydraulic oil tank; the replacement cycle of hydraulic oil as the oil liquid quality and (usually 1000h a replacement); replacement of hydraulic oil should be in the working temperature to ensure the hydraulic system good heat dissipation, should also be regular cleaning of hydraulic oil radiator.

Because the construction environment of asphalt paver is generally bad, the replacement cycle of hydraulic oil filter should be shortened (generally 750H). When replacing the new filter element, it should be checked, and it is prohibited to use the deformation, pollution or rust filter element.

When starting the engine every day, the engine should run idle for a period of time and then work with each actuator, which is beneficial to the use of the hydraulic pump

Because of the long-term use of paver, the parameters of hydraulic system will change sometimes, so the parameter setting of hydraulic system should be checked regularly and adjusted in time.