Little knowledge about power lubrication components of hydraulic pump

Lubrication is a part of the power system, in terms of technical requirements can not be careless, my company's hydraulic pump powertrain at the beginning of the process by the high requirements, in order to ensure the maximum interests of customers, to ensure the size and quality of products.

1, about technical requirements

The lubricating pump is equipped with 21520150 refueling joints. The oil outlet of the pump unit is provided with the corresponding joint and the clamping sleeve, which can be connected with the light pipe with the outer diameter of 6.

2, MX-F5/10 distributor (SAP Code: 801101762)

3, MX-F4/8-6/6 distributor (SAP Code: 801101696)

4, 208103026 refueling gun (SAP Code: 801101705)

Volume: 400g, 9-10cc/: 53.5mm, OD trip, gun gun diameter: 51mm.

5, AZ-02255-01 high pressure gun (SAP encoding: 801101704)

Volume: 400g, 9-10cc/: 53.5mm, OD trip, gun gun diameter: 51mm.

6, grease hose

The grease hose is supplied according to the code set agreed by both parties. Example: 1SN-5-K1/90K1-1000 grease hose

1SN-5 stands for 100120200 high pressure hose

K1 represents a combination of threaded sleeves with a straight core +1001 21200 on one end of the 100121201

90K1 represents a combination of threaded sleeves with a 90 degree bend expansion core +1001 21200 at the other end of the 100121202

Another optional 45K1 represents the combination form of 100121206 21200 bend expansion core +1001 45;

90K2 stands for 100121203 of the 90 degree bend expansion core +1001 21200 threaded sleeve combination form

1000 represents the length of the hose assembly, with mm as the unit (the straight expansion core with the oil face end as the benchmark, and the bending expansion core as the centerline of the oil port as the baseline).

2, above components for BEKA brand, origin: germany.

3, above the surface of the material should be antirust treatment, open storage for two years shall not rust.