Machinery industry tire maintenance, can save a lot of money
Whether it is agricultural machinery or industrial machinery and equipment, are inseparable from the tire. Tires will wear after use, of course, a good quality of life longer, the use of appropriate methods will also be longer life. Here we take agricultural machinery as an example, to see how to maintain good tires.
The length of service life of agricultural machinery tires has an important relationship with the operation quality, operation efficiency and safety of agricultural machinery, so it is very important to scientifically use and maintain agricultural machinery tires to extend their service life.
Keep the tire proper pressure, and according to the working environment and conditions for proper adjustment, too low or too high pressure risk will increase, not only shorten the life, reduce operation efficiency, and even cause a tire accident.
The correct driving operation, to achieve "six slow", that is slow start, slow steering, slow braking, downhill slow, slow parking and bad road slow, as far as possible to avoid high speed sharp turn and emergency brake. When the car is trapped in the field operation, the wheel should be avoided to run at high speed in the pit. Speed should be based on the actual situation, try to avoid long-distance high-speed transportation.
Keeping the load balance of agricultural machinery unit without serious overloading behavior.
Correct maintenance of steering system, keep the correct value of front beam to prevent early wear of tire.
Timely maintenance, repair, before and after the car to check whether the tires have scratch, deformation, loose, stained with oil, etc., if necessary, should be eliminated, if necessary, adjust maintenance repair.
When dismounting the tyre, it should be carried out on the clean ground without the tool with the notch and sharp angle; when installing, don't bring the sediment into the direction of the pattern, and don't install the reverse.
Scientific storage and storage of tires, as far as possible to avoid high temperature sunlight exposure, tires should not be contaminated with oil, acid, alkali, etc., in order to prevent corrosion. If you don't work for a long time, the roof should be put up so that the tire can not withstand the pressure, but don't deflate. Try to keep the tires out of heavy load during long-term parking.
In general, the tire should be interchanged after the tire has been used for a certain time, so as to prolong the service life of the tire.
Related recommendation:
Dongfeng, middle heavy truck export achieved new results
