Mechanical engineering tutor you choose millingmachines
Milling machine as a kind of highway maintenance engineering, in the selection and there are a lot of matters needing attention in the process of using. To choose suitable milling machine according to the project's size and pavement performance. Therefore, the purchase of pavemill discussed is very necessary.
The milling machine is mainly used in highways, airports, docks, parking lot, yard, workshop and asphalt concrete surface layer of Asphalt Pavement Renovation excavation, clear net, hold the bag, oil wave, rutting, pavement markings, picking and surface layer of cement pavement dislocation milling, milling machine can also be used for small excavation pit.
The 4 elements choose millingmachines:
1) the working speed and driving speed, milling width and depth. Milling machine low speed operation, high-speed transfer of two kinds of conditions, working speed is also related to the size and type of walking mechanism, general minicomputer is 0 ~ 12m / min; the mainframe is 0 ~ 30m / min. Travel speed can be determined according to the needs and the form of walking mechanism, generally 0 ~ 10km / h. Large and medium type milling machine is generally not more than 4.5km / h. The width of the milling milling machine with fixed width and variable width two, variable width at 250mm, a variable width level. The milling width should be based on the premise of reducing the quality of the whole machine and improving the mobility of the whole machine, and considering the structural dimension requirements of the whole machine as the selection principle. Milling width can be according to our standard and practical needs, according to the 300mm series commonly adopted internationally, 500mm, 1000mm, 1200mm, 1300mm, 1500mm, 1900mm, 2000mm, 2100mm and 2600mm to determine. Milling width requirements after tire / track indentation edge width, small milling machine by rotating the leg to achieve. The milling depth is different according to the size of the machine and the engineering requirements, and the milling depth of the same width is also different. The small and medium milling machine 0 ~ 180mm; large and medium-sized milling machine 0 ~ 315mm. The latest models of the small and medium-sized milling depth is up to 300mm. The product of milling width and milling depth is the working section of the rotor, which is determined by the power of the engine. (two).
2) reliability. The milling machine is not only reliable performance, and operation quality should also be reliable.
3) durability. The milling machine can be used for a long time, can work well under poor working conditions, reduce the maintenance cost of milling machine.
4) versatility and compatibility. The selection of milling machine as compatible with other equipment, accessories and machinery can best have previously used configuration.
The above content, with the help of the construction machinery house can be solved for you, we have professionals to answer questions for you.
