Mobile hydraulic lifting platform design and manufacture and performance      

1 movable hydraulic lifting platform is a scissor type structure, which has strong bearing capacity, stable lifting, reliable operation, easy operation and convenient maintenance.

The material used is made by Shanghai iron and Steel Technology Research Institute, and the welded frame is firm and reliable. The Institute for the production of steel in strength and stiffness in a leading position. It meets our design needs.

For the larger support, we use the high strength manganese rectangular tube, its strength and steel to meet the design requirements, and light weight.

2, for all the rotating hinge, all use sliding bearing, and can be lubricated, improve the service life of the bearing, flexible rotation, small friction, stable in the process of movement.

3, for all shaft parts, quenching and tempering heat treatment, so that the shaft to increase the strength, improve the wear resistance, so that the service life of the equipment is extended, the use of more stable.

4, the hydraulic system imported from Italy station, the design of proper valve through the system, the system of control valve is arranged in a connecting flange, not only make the structure more compact, but also fundamentally solve the traditional external Superposition valve block hydraulic station of large volume, easy leakage problem. The hydraulic control one-way valve, sequence valve and throttle valve and selection, the system is more simple, safe and reliable, the operation is more convenient (the whole system only needs a control button to complete the lifting movement, from the surface to the electric control part is greatly simplified, and the maximum reduction was likely due to circuit the reason of the fault). The selection of hydraulic station hydraulic pump with pressure compensation design, the maximum pressure of 30Mpa pump, continuous start life of not less than 500 thousand times, but also make the hydraulic station noise is reduced to a minimum value (dB at 1m distance of not more than 55 dB). Pump lifting mechanism with locking device, the device can stay at any position.

Seals using the German import sealing ring 5, hydraulic cylinder, long service life, no leakage.

6, Schneider electrical system adopts imported appliances, and is equipped with voltage and current relay, can ensure the over voltage and over current situation, to avoid the damage of electronic components, and with the emergency stop button can promptly cut off the power supply in case of an accident.

7. The telescopic pedal of the equipment is manually pulled and pulled. The nylon strip is installed on the contact surface, so that the pedal is easy to move, flexible, no shaking and no noise. And ensure self locking at any position.

8. The movable wheel of the equipment is installed on the rack, which reduces the height of the equipment and makes it more convenient to use

9, the equipment adopts a telescopic ladder, reducing the size of the equipment, increase the safety of appearance.

10, when we design the product, specially add overload protection device, make its performance more safe and reliable, to prevent the equipment in overload state damage.

In short, our factory more than 20 years of experience in the manufacture of hydraulic elevators, users across the Yangtze River and North, there are many users abroad, so I hope to choose our products.