On the use and maintenance of Trailer ABS  

ABS system is the abbreviation of anti lock braking system (Anti-LockBrakingSystem). It's a very important safety device on the car. Used in automobile braking to prevent wheel lock slip, in order to improve the directional stability during braking and steering maneuverability and shorten the braking distance, give full play to the braking efficiency.

Today, Xiao Bian for everyone to popularize the use and maintenance of Trailer ABS knowledge.

The use and maintenance of ABS

1, wash the car can not directly flush the combination valve, otherwise it will cause ABS system failure.

2, the welding operation of the vehicle, you must unplug the ABS power wiring harness, otherwise ECU will be damaged.

3, to ensure the tractor brake gas path no air leakage, no air pressure and other phenomena, to ensure that the tractor has conventional braking.

4, trailer installed pipeline filter, need to clean three months, to ensure that the pipeline clean, in order to prevent damage to ABS.

5, often check whether the sensor joint is loose, if need to replace, can not insert wrong, need to ensure the gas path and sensor one-to-one correspondence, the same side brake trachea corresponding to the same side of the valve outlet.

6, the wheel maintenance should pay attention to not damage the ring surface, such as gear ring surface dust or oil, need to clean, but also need to clean wheel speed sensor.

7, when installing the wheel, the sensor should be pushed to the end, to ensure the gap between the sensor and gear ring, wheel hub installation should pay attention to, can not be barbaric installation.

8, in the wet slippery road emergency braking, need not use continuous point movement, only need to fully brake.

9, because most brakes are conventional braking, ABS does not participate in the braking process, and therefore generally does not cause the wheel high temperature, but abnormal high temperature may affect the sensor.

10, if the failure occurs, the user can not dismantle parts of the ABS system, should be consulted by the ABS manufacturer or the after-sales service department of Ling Yu company.