Reasonable hydraulic cylinder design, you should know that

Hydraulic cylinder design should consider a lot of factors, taking into account the type of adaptation, working conditions, environment, horsepower, etc., on this, Xiaobian detailed for everyone to sum up, for reference and share.

1., to minimize the size of the hydraulic cylinder, so that the compact structure.

2. ensure that each part has enough strength, stiffness and durability.

3. hydraulic cylinder structure elements should adopt standard series size, as far as possible to choose the standard parts often used.

4. try to make the cost low, easy to manufacture, convenient maintenance.

5. long stroke hydraulic cylinder piston rod should be avoided as far as possible.

6. according to the working conditions and specific conditions of the hydraulic cylinder, the buffer, exhaust and dustproof measures are taken into account.

7. to ensure the speed of hydraulic cylinder reciprocating movement, the traction required by the stroke.

The 8. piston rod is preferably pulled without compression so as to avoid bending deformation.

9. avoid lateral load of hydraulic cylinder as much as possible.

10. can eliminate the deflection between piston, piston rod and guide rail.

11. be possible to seal and prevent leakage.

The 12. hydraulic cylinder can not be bent due to the limited temperature. Especially the long hydraulic cylinder should pay more attention to.

Wonderful recommendation:

Engineering machinery house Dynapac F182CS crawler paver walking wheel

The hydraulic pump "noise", was actually the reason

Futuris RHK800G10B hydraulic oil filter