Road milling machine maintenance strategy      

The pavement planer is asphalt pavement construction machinery maintenance is one of the main types, mainly used for highway, city road asphalt concrete surface layer removal kit, oil wave, crazing, rutting. The old layer damaged by pavement milling, laying a new surface is one of the most economical maintenance method of modernization, because it old material of high work efficiency, simple construction process, milling depth is easy to control, convenient and flexible operation, good maneuvering performance, milling can be directly recycled, so it is widely used in the town municipal road and highway maintenance engineering.

Customers in the purchase of the milling machine, the continued use of the process will inevitably be consumed and wear, prolong the service life of the machine, the correct operation and proper maintenance is a must, here will share some maintenance experience of milling machine with you.

1, to extend the service life of the pavement planer first measures the machine must be operated by professional staff, and carefully read the operating manual.

The main work part 2, milling machine for milling cutter, gaskets, bearings, milling drum, and pavement friction due to long time operation, consumption is the fastest in this part, the regular replacement, check in order to extend the service life of the machine.

3, prolong the service life of the pavement planer measures should be daily check, if the above grinding groove cutter shaft diameter more than 25%, should be replaced. Generally speaking, the life of cutter shaft is half life of tungsten steel milling cutter. From the square area, the life, the milling depth of 5mm is about 350-500 square meters. But please note that there are many factors that can affect the life of cutter shaft, so to daily check.

4, milling machine for safety in maintenance, should first unplug the engine spark plug, preferably by the qualified mechanic.

5, to extend the road milling machine to check the oil level service life measures each time before the operation of the milling machine after use to clean the air filter.