Sludge treatment, how to determine sludge filter press can be re feeding

For sludge filter press intermittent working mode, such as frame filter, filter press, filter press, is the first sludge feeding pump delivery to the sludge dewatering machine, dehydration, after unloading the mud cake after the completion of a sludge treatment cycle, once again into the filter press sludge in sludge pump.

But the sludge treatment enterprises how to judge sludge filter press has completed a cycle of sludge dewatering, can again feed it? Sludge filter press manufacturer Zhengzhou Dingsheng technology project will share two judgment skills to sludge treatment enterprises.

1, through the feed pressure to determine, usually when the feed pressure has reached the upper limit of the set pressure, you can determine the completion of the feed, indicating that the filter press filter work is finished;

2, the filter plate discharge significantly reduced also represents the completion of the filter press work, you can carry out the next feed.

For manual or semi automatic type sludge dewatering machine, after the operation personnel familiar with the equipment, can gradually master the operation rule of equipment, determine the operation cycle length, the formation of personal experience, but the actual judgment not only by experience, or to combine some scientific data, reasonable to infer the filtration cycle.

Zhengzhou Dingsheng EHV series of sludge filter press with automatic operation, each sludge treatment period of about 40 minutes, automatic feeding, automatic pressing, automatic unloading mud cake sludge dewatering machine, intelligent operation, without machine operation of sludge dewatering of sludge dewatering after artificial, more convenient, and the sludge treatment efficiency is increased by 70% more than ordinary sludge filter press. If the sludge treatment equipment needs to be taken into consideration, the automatic sludge filter press can be considered.