Super 1800-2 Vogele paver performance characteristics of the slope
This kind of slope paver, which is made of super 1800-2 modification, is especially suitable for asphalt slope paving with a slope of less than 32 degrees. Slope paving is common in landfills, works, canals, dams or reservoirs. In order to realize the ramp paving, we have carried out some modifications on the super 1800-2 paver in order to ensure the safety of the machine operation and the safety of the paving team.
1. It is suitable for slope paving within 32 degrees of slope
2 、 the feed opening opening gate is used to control feed
3, even on steep ramps, the ErgoPlus offers the highest degree of handling comfort
4. The access of the driver to the bridge and the driver's seat can be adjusted according to the requirements of the slope to ensure safe and user-friendly construction
Power assembly | |
Engine | 铂金斯 |
Model | 1106D-E66TA |
power | (By DIN standard)129.6kW/2000rpm ECO Pattern:125kW/1800rpm |
Fuel tank volume | 300L |
Electrical system | 24V |
chassis | |
Track | Rubber track plate |
Ground area | 2830mm x 305mm |
Walking drive | Both sides track electronic control, independent hydraulic drive |
speed | Paving:Stepless speed change,Maximum24m/min Walk:Stepless speed change,Maximum4.5km/h |
drive | Both sides of the conveyor and both sides of the dragon are independent hydraulic drive |
2个,Can be reversed temporarily, the scraper can be replaced | |
2个,Reversible, replaceable bladeDiameter::400mm | |
Standard configuration: hydraulic stepless regulation, amplitude20cm | |
Hopper | |
hopper capacity | 13t |
3265mm | |
slope | |
32°within | |
Down grade | 10°within |
AB 500 | Basic width2.55m、Stepless range2.55m to 5m,Maximum width:5m |
Screed type | TV,TP1,TP2 |
Maximum30cm | |
Screed heating | Screed plate, rammer and pressure beam |
Three-phase alternator | |
2.55m | |
length | Transport status: main engine plus ironing plate -AB 500 TV:6.3m -AB 500 TP1/TP2:6.4m |
23.6t(assembling AB 500TV Ironing board) |