The super invincible refitting combined with the market demand for new products       

In recent years, with the development of national infrastructure construction, all kinds of construction machinery and equipment are everywhere in the market, among them the most representative is loader and excavator. However, due to the diversity and complexity of geological environment and engineering conditions, a variety of modified products emerge as the times require. The Xiagong combined with the actual needs of users, product modification, effective development of market space, the effect of loud shouts of applause.

1 、 drilling machine with cutting down hole

Cutting DTH Drill can adapt to drilling of various hardness rock, change the power head according to the site rock condition, one machine is multi-purpose, suitable for most of the geological conditions, not for different working conditions, and all give it to it. The XG821EL and XG822EL type excavator power 125KW, a rod hole 6 meters drilling rig, the effect is more ideal, more suitable excavator counterweight. Not high on the hardness of rock strata can be common cutting drill, aperture is generally 80- Phi Phi 115, hole depth of 6-8 meters, the deepest 12 meters (only 20T and above, the fastest drilling machines) up to 4 m / min, usually 2-3 M / min. It can also be used as a DTH Drill. It only needs to change the cutting bit and install the DTH hammer, which is the standard DTH Drill. Its diameter is 80-, the hole is 133 meters, the hole depth is 6-8 meters, the limit is 12 meters, and the drilling speed is about 0.5-1 meters / min.. It can also be used as a pile hole drill, and only need to replace the special drill bit. It can be used for soft foundation hole operation. The hole diameter is 150- 250, the hole depth is 8-12 meters, and the drilling speed is about 1-3 meters per minute.

2 、 impact drilling machine

In the domestic blasting engineering, the hard rock formations such as granite are generally drilled by imported DTH drill. The hole drill for granite and limestone above the hard rock, for not too hard rock effect is not ideal, so the installation of excavator chassis, boom system, air compressor system and hydraulic system for drilling rig, the formation of hydraulic percussion drill, for granite, limestone and other more than 7 rock drilling speed can reach 0.5-1m/min. Drilling speed, high efficiency, low energy consumption, strong maneuverability.

6-8T small excavator because many excavator power is less than 45KW (such as: XG806 power: 40kW), modified small flow effect is not obvious, with an engine designed with air compressor in the machine, so that the power to meet the technical requirements, greatly improving the efficiency of drilling.

8-9T small excavator, can be converted into a small percussion drill, digging machine power requirements better than 45W, the greater the power, the general drilling diameter of less than 50, drilling depth of 3 meters, the connecting rod can hit 5 meters, drilling speed of about 0.8-1.5 M / min.

15T medium excavator engine power, more than 80kW, can be converted into a large impact drill, drilling diameter 80- with a diameter of 90 mm, hole depth of about 4 meters, drilling speed 0.7-1 M / min.

20T and above can be changed into a large impact drill hole 6 meters, 23T and above power due to adequate flow effect is far better than the maximum hole depth of medium-sized excavator, a single shot 8 meters.

3, screw drilling machine

Spiral drill is rapid construction machinery operation hole for building foundation engineering, it is suitable for electric power, telecommunications, municipal, high-speed rail, high-speed, highway, construction, petroleum, forest and other soil layer above the pole, piles, piers, trees and other drilling projects, multi features. The maximum drilling hole of spiral drilling machine can reach 1.5 meters wide and 10 meters deep, and its construction efficiency is high. It is the ideal foundation construction equipment for electric power, communication, municipal, railway, highway, building, petroleum, forest and so on.

Spiral drilling machine is suitable for filling layer, clay layer, silt layer, silt layer, sandy soil layer and short spiral can not be drilled in the part of gravel and gravel layer. Core drills are also used to embed rock formations (such as concrete, shale and other soft rock formations).

4, self-propelled continuous dynamic compaction machine

This product adopts Xiamen loader is modified to release, will lift the hammer with hydraulic cylinder after tamping hammer under gravity subgrade. The vertical impact force is large, the lateral horizontal thrust is small, and the influence on the surrounding structure is small; through the intelligent continuous dynamic compaction construction, it can quickly detect the compactness of roadbed:

Continuous tamping machine is not only the traditional roller compacted area cannot tamp reinforcement, but the entire back roadbed overall dynamic compaction reinforcement, reduce the settlement.

According to the relationship between the settlement and the degree of compaction, to improve the original standard compaction degree of two to three percentage points as the standard.

Continuous tamping machine can effectively ensure the compaction effect without preloading area (strength increase, stable and uniform), compared with the traditional artificial ramming has great technical advantages.

Continuous dynamic compaction machine can improve the compaction degree of preloading backfill Subgrade in 2~5%, which can improve subgrade compaction and ensure the stable and uniform subgrade strength.

5 、 special shovel excavator

Small special tunnel digging machine, can be in the small tunnel of 2.3*2.5m, taking advantage of 360 degree rotation and large volume machines, not falling out of the tunnel, can quickly and efficiently discharge.

Shovel into the counterforce along the equipment chassis downward, so that the machine can be firmly attached to the ground in the quarry work, easy manipulation and not backwards. And low noise, no pollution, can be used in enclosed space, high reliability, low cost.

6, special forklift truck

The device consists of E series forklift converted to Xiamen, can achieve 360 degree obstacle installation of high-speed road isolation protective cement pier work, change the past rely on the crane or manual operation mode, high efficiency, low cost.

Over the past 60 years, Xiagong dare to transcend, unremitting efforts, has always been committed to actively participate in major projects China and help countries scientific research development, rooted around the world, Chinese, with high quality products and services to help customers create value, won the industry and approved by the leadership, received many honors. On the road of innovation, and constantly sum up experience, committed to the development of new products and create new performance.