The Vogele MT3000-2 double belt type transport vehicle performance
The advanced MT3000-2 double stage belt conveyor can ensure ideal and continuous material flow under various conditions. For the traditional road construction site that needs to be supplied or the trench to be backfilled beside the road, the MT 3000-2 dual stage belt conveyor equipped with a swing belt conveyor is the ideal solution. The innovative material transfer system has realized the transport capacity of up to 1200t/h, and the ErgoPlus control system ensures the simple and safe operation of the machine.
1, continuous, non contact type paver by the material, to ensure the ideal paving quality.
2, a high performance transport concept, large hopper 16.4t, to unload a large car in 60 seconds.
3, unloading belt to each side of the swing 55 degrees.
4, the ErgoPlus operating system, easy to safely manipulate one or two people.
5, widely used, improve the economic efficiency.
Power assembly
Deutz engine
Model TCD 2012 L06 2V
emission standard
Standard EU Stage 3a, US EPA Tier3
Power rating: 142kW/2000rpm (in accordance with DIN standard) ECO mode: 139kW/1800rpm
Fuel tank volume 450L
Electrical system 24V
chassis
Tracked rubber track plate
The grounding area is 3060mm x 305mm
Driving on both sides of track independent drive and electronic control
Speed maximum speed 24m/min (stepless speed) running speed: 4.5km/h (stepless speed change)
Material conveying system
2 screw conveyor, hydraulic drive, installed in the hopper diameter: 400mm
Belt conveyor 2, hydraulic drive, the belt can swing to the left and right 55 degrees, from the transfer vehicle to the outside of the discharge point distance of 3500mm 3900mm (maximum) belt width: 1100mm
Transport capacity 1200t/h (maximum)
Hopper
Hopper capacity 16.4t
Width 3680mm (hopper open)
Feed height 600mm (hopper bottom)
Additional hopper
The capacity of 20-24t (placed among pavers in the hopper)
Size (Transportation) and quality
Length 14820mm
width
3000mm
Height 3100mm
Quality 23.8t
