Three step strategy, easy to solve hopper cleaning problem
The cleaning of the hopper is a headache for many people. After a day's work, you have to clean up the equipment for second days. So how quickly and effectively clean up, is very much you want to know.
Because the pump bucket often has solidified concrete, so it will consume a lot of time for the boss. The following three small coup to easily fix this problem, we preview.
The first step: save time and effort
Since the bottom plate hopper in the pump is often easy to accumulate a lot of concrete, if not timely clean, clean up and blocked the entrance to the cave, until it is felt hammer shovel is very laborious, so you can use plastic bags a bag of sand or mud on the seabed, so cleaning concrete more easily through the bottom out. It should be noted that the sediment should not be too much, should avoid contact with the bottom of the S tube.
The second step: "base friend" walk together all his life
Cleaning pump hopper can not be separated from the "base friend" is - waste oil! Before construction, you can use waste oil (can go to the nearby repair shop to buy) to wipe the bucket, so that the material is not easy to sticky wall, so that within 12 hours, just a little water, the bucket will be clean.
The third step: foolproof
Since each construction in the hopper are inevitably there will be buildup, so every time after work, remember to clean up the hopper in a timely manner!
After all, today is not clear, the accumulated material will not be less, sooner or later have to do sooner rather than later.
I believe that through these steps, you must save more time than usual. Go ahead and try it.
Related recommendation:
Wuxi together Shenzhen drag Co
