Through type shelves should be used like this　　

Through shelves and shelves or corridor into the rack. The through type rack can be used for the forklift to enter and store the goods in the passageway, which is suitable for the storage of the goods of less varieties and large quantities.

Through shelves in addition to close the channel section, because the forklift need to enter the internal access of goods shelves, usually not more than 7 single goods recommended location depth. In order to improve the running speed of the forklift, can choose according to the actual needs of the configuration guide rail, compared with the rack, shelf library space utilization rate can be increased by more than 30%.

Although you already know how to use the rack can help enterprises to improve economic efficiency, but only pay attention to this point is not enough, you need to pay attention to is how to better use the shelf, so that maximize the economic benefits.

To better use the shelf to note that, in the design of a new warehouse or retrofit an existing warehouse, so it is necessary to review research on characteristics of the system used in the warehouse, for example, into the rack can achieve the maximum storage capacity in the smallest space,

Then you can choose this kind of economic logistics program. In the use of through shelves, loading and unloading from the side, which can effectively improve the time efficiency.

Through type rack is a kind of whole shelf which is not separated by channel and continuous. On the supporting rail, the pallet is stored in depth, one immediately followed, which makes it possible to store high density. The entry type shelf is suitable for the storage of goods with small variety and large quantity,

It is commonly used to store and enlarge goods of the same type, which has high space utilization, and is suitable for food industry, chemical industry, clothing industry, cold storage and other storage space with high cost, and its unit site storage cost is relatively low.

Through the direction of the goods can be divided into one-way and two-way arrangement, one-way (wall area) shelf depth is best controlled in the depth of 6 pallets, two-way (middle area can be picked up on both sides), the total depth of the shelf area is best controlled within the depth of 12 pallets,

In order to improve the efficiency and reliability of the forklift access (such as forklift shelves system, continued to "high high" mode of operation, easy to swing and hit the shelves forklift, so it is very important to fully consider the stability). Such storage system stability is weak, shelf should not be too high, usually should be controlled within 10 meters,

In order to strengthen the stability of the whole shelf system, besides the specification and type selection, it is necessary to add a fastening device. Single cargo should not be too large, overweight, usually weight control within 1500KG, tray span should not be greater than 1.5 meters. Forklift truck is often used as forward battery forklift or counterbalanced forklift truck.

Through the storage of goods shelves relatively dense, high stability requirements, so the required shelf accessories are relatively large, through accessories and shelf column piece connection, so that the goods can be safely and densely deposited on the corbel beam, to maximize the use of space.

Drive in rack accessories include: bracket, Niu Tuiliang, beam, top, pull back, pull the foot, guardrail etc..

Finally, to remind you, because through the shelves need forklift into the shelf internal access to goods, so the safety of personnel need to pay special attention to.