What should be paid attention to when the crusher starts to use?

The correct use method is that users must understand the equipment before, after, and after the purchase. Only by mastering the correct operation methods and precautions, can we better use the equipment to complete the production operation, and create more economic benefits for the enterprise. This paper invites the experts of Red Star crusher to talk about what we need to pay attention to when the crusher is in use.

First of all, what we should do is to understand the work of the last crusher, such as crusher in the production process has abnormal phenomenon, should first check and solve the fault.

Secondly, check whether there is material in the chute and the center of the crushing chamber, whether there is debris which is not easy to be broken in the body, whether there is any ore or other non broken substance in the crushing chamber.

Again, the crusher parts for inspection before the start, the screw, machine frame, motor foot bolt loosening, rotating parts without noise. Check whether the belt pulley is loose. If the belt looseness occurs for a long time, the belt should be replaced and the belt pulley should be tightened.

Then, before the crusher starts, the thin oil lubrication system must be started first, and the oil can be started after the normal return oil. At the same time, the oil system has no blockage or oil leakage.

Then, the boot signal should be sent before starting, and not to start with load. Before starting the machine, it is necessary to make sure that there is no one around the equipment, and people are not allowed to walk when running the equipment, so as to prevent the wounding during the operation of the equipment.

Finally, when running, the ore should be uniform, not negligible. Because too much ore is broken, the equipment load will be increased, the performance of the equipment will be affected, and the crushing efficiency will be affected. Therefore, to ensure uniform ore, so as to make the equipment stable operation.

Red Star crusher experts also told us that the equipment inspection or operation process, once found problems, should immediately stop, please professional inspection and maintenance, so as to avoid small faults are ignored, dragged into a big accident. Finally, the Red Star machine experts also hope that every crusher user can use the equipment correctly and produce safely.