Wirtgen milling machine maintenance       

XM series of road milling machine is one of the main equipment maintenance of asphalt concrete pavement construction, mainly for the renovation of highway excavation, urban roads, airports, etc of asphalt concrete surface layer, can also be used to clean the surface upheaval, oil wave, crazing, rutting and other defects, can also be used to the excavation surface pits and grooves, and galling and the surface of cement pavement layer dislocation milling.

XCMG road milling machine with advanced performance, high working efficiency, simple construction process, milling depth is easy to control, convenient and flexible operation, good maneuverability, old material milling can be directly recycled, is the ideal equipment for pavement maintenance mechanization.

1. First, the machine must be operated by professional staff, and carefully read the operation manual or instructions;

The main work part 2, milling machine as milling cutter, bearing shims, milling drum, and pavement friction due to long time operation, consumption is the fastest in this part, the regular replacement, check in order to extend the service life of the machine;

3, for the sake of safety in milling machine maintenance before, should first put the power broken motor, preferably by a qualified mechanic;

4. The milling cutter shaft should be inspected every day. If the groove is over 25 of the diameter of the cutter shaft, it should be replaced. Generally speaking, the life of cutter shaft is half life of tungsten steel milling cutter. From the square area, the life, the milling depth of 5mm is about 350-500 square meters. But please note that there are many factors that can affect the life of cutter shaft, so to daily check;