ABG paver's walking system brake protection: keep you safe
In the engineering machinery, there is a place where it is inconspicuous but absolutely not less, that is, its brake device. Good brake equipment, can help you work well, not only that, but also greatly reduce the occurrence of dangerous accidents, to ensure your safety.
Therefore, the maintenance and maintenance of the brake equipment is essential.
First: high temperature protection for brake
Prevent brake system corrosion, prevent brake pieces from killing on high temperature surface, eliminate brake screams, maintain good lubrication durability, and need high temperature above 1400C and contain ceramic components. Therefore, check the thickness of the brake disc or the brake shoe on a regular basis. Under normal driving conditions, the service life of the brake disc of the front brake is 30 thousand - 50 thousand kilometers, and the service life of the brake disc of the rear brake is 120 thousand - 150 thousand kilometers. Once the brakes are worn to the limit, the brake should be replaced in time.
S1700 Vogele paver brake
Mechanical engineering can provide s1700 Vogele paver brakes, for your excellent material, wear resistance, high temperature, long service life, effectively guarantee the normal operation of your device and brake device.
Second: lubricating and maintenance of the brake pump
The movable shaft and the skin bowl of the lubricating brake pump can be used to maintain the softness of the pump bushing and prolong the service life of the sub pump, and the full synthetic brake pump lubricating oil is needed.
Third: brake disc cleaning
Quickly clean the brake disc, brake drum and any parts of the oil stain, dirt and friction dust, keep the brake disc heat dissipation well, eliminate the brake piercing noise, and promote the even brake.
Fourth: replacement of brake oil
The brake oil has the characteristics of water absorption. It will corrode the brake system for a long time and bring hidden danger to the driving. In general, it is suggested that the owner of the car change the brake oil every 20 thousand kilometers. The main purpose is to ensure the cleanliness of the brake oil.
Fifth: antirust lubrication of the contact surface of the tyre screw, brake disc and steel ring
It is necessary to prevent corrosion, prevent screws and surface heat from being killed, and facilitate disassembly. It requires high temperature resistance to more than 1100C of aluminum containing products, so as to ensure contact area with brake pads and improve braking force.
Brake protection of ABG paver's walking system
Brake protection of ABG paver's walking system
ABG paver walking system brake protection: it is the patron saint of paver equipment, and the two brothers with different personalities of the throttle. It can allow the paver to slow down the driving speed, when the owner is in danger, it can also emergency brake, protect the safety of the owner.
(this article is copyrighted to the home of the engineering machinery, if any reprint, please indicate otherwise.)
