Are you still worried about the damage to the split Caterpillar board

The advantages of the split type Caterpillar board:

It is convenient to change the Caterpillar board. All the pavers now use this. The advantage is that the replacement is easy, the stop time is short, and all the tracks are unloaded.

All the components of the caterpillar plate unit are more or less likely to be worn out. There are many reasons. Wear can be reduced but not completely eliminated. The pollution of accessories, incorrect installation or use of non - original accessories will not only affect the production efficiency of the machine, but also increase the wear of other components.

What is wear?

Two pieces of mutual extrusion and relative motion produce wear. In this process, the tiny particles on the surface of the two elements are separated from the surface of the original and component parts.

Are you still worried about the damage to the split Caterpillar board

The factors of wear of Caterpillar board:

1, the accumulation of residue of dust and bitumen (clean and clean)

2. The speed of the machine transfer is too fast.

3, the chain has risen too small

4, there are friction materials (sand, dust, etc.) in the sliding or rotating parts.

How to avoid wear?

Pollution will increase wear to a large extent: friction materials (such as sand grains) will cause friction between all interfaces, and significantly reduce the service life of track panel unit components. In a word, to improve the service life of the components, it is essential to clean and maintain regularly.

The following methods can improve the service life

Clean the machine thoroughly daily

Check the damaged parts regularly and take effective measures to combat the wear or damage of the components.

Are you still worried about the damage to the split Caterpillar board

Are you still worried about the damage to the split Caterpillar board

The Xugong RP755 paver, which is supplied by the home of the construction machinery, is divided into two body caterpillar plates. The size is standard, the processing is fine and the design is perfect. Don't hesitate any more.

(this article is copyrighted to the home of the engineering machinery, if any reprint, please indicate otherwise.)