Ingersoll Rand DD110 roller belt tensioner that

The tightening wheel is a belt tensioning device used in the transmission system of a mechanical vehicle. There is also a belt tightening wheel assembly on the roller. It is a wearing piece. The belt is easy to elongate for a long time, and some tension wheels can automatically adjust the tension of the belt. Besides, the tightening wheel belt operates more smoothly and prevents slipping.

Ingersoll Rand DD110 roller belt tensioner that

Structure principle:

In order to maintain proper belt tension, avoid belt slipping, compensate for belt wear and aging, it needs some torque. When the belt tightening wheel runs, the moving belt may vibrate in the tightening wheel, which will lead to the premature wear of the belt and the tightening wheel. Therefore, the resistance mechanism is added to the tightening wheel. However, due to the more parameters that affect the torque and resistance of the tightening wheel, the influence of each parameter is also different. So the relationship between the components of the tightening wheel and the torque and resistance is very complicated. Torque change directly affects the change of resistance, and it is the main factor of resistance. The main factor affecting torque is the parameter of torsion spring. The resistance value of the tightening wheel can be improved by reducing the diameter of the torsion spring properly.

Here is a look at the equipment Ingersoll Rand DD110 roller maintenance measures:

1, work 8 hours a day should be maintained: diesel fuel tank, diesel engine crankshaft, hydraulic oil, oil dipstick plane scraper version, flat belt tensioner, filler bolt, nut.

2, work 40 hours a week should maintain: triangle belt tensioning degree, chain tensioning degree, the front wheel and the back wheel support plate left refueling refueling, refueling, steering hand brake, reversing handle rod, the vibration transmission bearing filler.

3, monthly work for 160 hours should be maintained: diesel engine cylinder head nut, pull rod, nut crankshaft counterbalance bolt, valve clearance, diesel engine crankcase, diesel engine air filter, triangle belt wear, vibration clutch pull, rubber shock absorber block damage.

4, half a year work 800 hours should be maintained: flat belt wear and tear, half a year after a small road roller mill.

Ingersoll Rand DD110 roller is one of the older models, so it is necessary to carry out maintenance and construction measures in order to better. If you have problems with the belt tightening wheel, you can take a look at this kind of accessories in the home of the construction machinery. The quality of the imported products is perfectly matched with your machine, so that your machine can be refreshed.

(this article is copyrighted to the home of the engineering machinery, if any reprint, please indicate otherwise.)