Supply of high quality 28B/28BH paver transport chain       

Drive sprocket and roller chain, made of high wear-resistant material, high precision, to ensure ideal power transmission, smooth operation, low wear. As a result, the material is evenly distributed, reliable and long life.

Transmission chain in the use of the need to pay attention to:

Most of the driving chain is exposed in use, easy to accumulate dust, sediment and grease, require frequent cleaning. When cleaning, the chain can not be disassembled, and the chain can be removed thoroughly. Thorough cleaning is to remove the chain after dismantling in the cleaning agent (gasoline or kerosene) after soaking for part of the time, brush by brush by brush. After cleaning, the chain is soaked in 70~80 C lube oil so that it is filled with oil and then installed and used.

In the use of the chain, if the friction surface is brown or dark brown, the oil supply is generally insufficient, should be timely added to the lubricating oil. The quality of chain lubrication will directly affect the service life of the chain. The best use of lubricating chain chain special lubricating oil or No. 30 and No. 40 mechanical oil, gear oil can also be used instead of SAE90. You must use some of the oil viscosity, if the viscosity is too small, the vehicle in the road of lubricating oil will splash to various parts of the body, the impact of car appearance, soiled his trousers, and the lubrication effect is not good.

When replacing the new chain, we should pay attention to two kinds of packing forms when the chain is out of the factory: one is wax sealed, the other is pre - lubricated. The so-called "pre lubrication" means that the chain is soaked before the factory is out of the oil. The above two processes are mainly for antirust and easy to store. The latter after opening the package can be installed directly, the former should first go to the wax, and clean diesel after re immersion.

When lubricating oil is injected, it should not only pour oil on the surface of the chain, but also let the oil be immersed in the gap between the pivot and the inner and outer chain plates, so as to achieve the purpose of lubrication. After the injection, use dry cloth to wipe off the excess oil. When cleaning and injiling the chain, the engine must be turned off first, otherwise the finger is hanged into the sprocket, causing unnecessary damage.

Again, when the chain is installed, its loose edge should have a proper initial sag. The initial sag is about 1% ~ 2% of the center distance of the sprocket. And the front and rear axle and rear suspension axis are in a straight line, when the chain is just in the theory of the longest value. When the chain is adjusted, the normal tensioning of the chain in the three axis position should be satisfied. If the chain is too tight, the drive will not be smooth, the power consumption is increased, the wear of the chain and sprocket is accelerated, and the chain is easily broken and even accidents occur. When the chain is loose, it will send out abnormal sound, increase the vibration, and have the danger of losing the chain.

Supply of high quality 28B/28BH paver transport chain

Supply of high quality 28B/28BH paver transport chain

The imported 28B/28BH paver of Xugong imported from the construction machinery home has excellent material quality, reliable quality, convenient operation and long life. It is your ideal choice.

(in this article the original article is copyrighted to the construction machinery house all if the reprint, please indicate otherwise.)