Maintenance and repair of RP952 asphalt paver

1, in order to ensure the paver work efficiently, or at any time into the paving work, should at any time and regularly to the paver for maintenance, repair and maintenance can be carried out in the non driven static conditions, and ensure the paver will not move; hanging objects, such as the screed should fall in the lowest state maintenance; maintenance or repair work, only when the engine flameout; when handling motor thermal system, the heating circuit must disconnect the load switch.

2, it is strictly prohibited to use high-pressure water jet to flush the engine which has not been extinguished or just extinguished, and avoid flushing as far as possible, so as to avoid water entering the fuel tank.

3, when welding work, should first pull down battery switch.

4. Before maintenance, the hydraulic pipeline should be in the state of no pressure.

5, after maintenance, should be safety devices (such as foot pedals, cover plate, horn, indicator light, etc.) re fixed.

6, the machine is in operation, should ensure that the conveying belt and feeding on the worm does not directly stand, to prevent personal injury accident!