Specialties provide the starting motor accessories for the roller

起The motive is also called the motor, which transforms the electric energy of the battery into mechanical energy and drives the engine's flywheel to turn the engine to start. Provide Ingersoll Rand DD110 roller to start the motor's mechanical engineering for you. The following small editor for you to briefly introduce this part of the accessories.

Ingersoll Rand DD110 roller to start the motor usually has three parts

DC motor: generating torque, converting the electric energy of the battery into a machine.

Transmission mechanism: when the engine starts, the driving gear of the starter is meshed into the flywheel ring, and the starter torque is passed to the engine crankshaft. When the engine is started, the starter is automatically removed from the gear ring.

Electromagnetic switch: the control device of the starter, the switch of the control circuit.

The DC electric starter is mostly used in the internal combustion engine, which is characterized by compact structure, simple operation and easy maintenance. The DC starter is composed of a DC series excited motor, a control mechanism and a clutch mechanism. It specializes in starting the engine and requires powerful torque, so it will pass a large amount of current to reach hundreds of amperes. At low rotational speed, the torque of the DC motor is large and the torque becomes smaller when the speed is high. It is very suitable to be used as a starter.

Look at the faults that the starting motor usually has.

1. The battery has no electricity or weak power, so the failure of the starter can not be rotated or rotated slowly.

2. The line head of the starter is loose or off, and the switch or the adsorption switch is invalid.

3, the brush wear or brush face is not correct, the spring is weak, so that the rectifier is in bad contact.

4. Short circuit and circuit breakage of excitation coil or armature coil.

5. The rectifier is fouled and the mica piece protrudes, causing the brush to be in bad contact with the rectifier.

Mechanical engineering, specializing in the production of roller to start the motor for more than 20 years, many years of manufacturing experience, effectively reducing the failure rate of the starting motor, improving the service life, we use one hundred percent and one hundred percent sincere enthusiasm, welcome you to the Ingersoll Rand DD110 roller to start the motor at.

(this article is copyrighted to the home of the engineering machinery, if any reprint, please indicate otherwise.)