The type and selection of the new knowledge get: loader working device

Generally, loaders are equipped with many special devices with different functions according to their functions. They can be applied to different working environments. Today, Xiaobian takes you to know all kinds of bucket and matching of loaders.

One

Earthwork

Earthwork is mainly used to shovel soil, so the lower end of the design is very flat, longer than the general, no arc.

As follows, the earthwork is generally larger than the standard, as follows: the 9 teeth are earthwork and the 8 is a standard bucket.

Voiceover: the rock bucket I opened just looked at the bottom of the tooth when the arm was completely lifted. The earthwork bucket could see a lot when it completely closed the small arm, at least 40 centimeters. The design of the earthwork is because it is easier to put mud into the bucket when the mud is shoveled. The earth bucket is very flat under the bucket. It is good to use when it is leveled.

Two

Standard bucket

The icon "stone" is a standard bucket.

Three

Rock bucket

Rock bucket, shovel stone special, factory will be strengthened when the factory is out. In some places, the shovel needs to be strengthened by itself, but the iron plate reinforced by the manufacturer is very thick and is locked with screws, which is convenient for replacement.

The shovel stone is worn out so that the bucket is not easily deformed. Both sides of the bucket, both sides of the teeth, are strengthened inside the bucket. The red part of the middle tooth is called "bucket knife".

Hand in hand: personal feeling or electric welding is better and stronger. Mainly for loading and unloading rock conditions, bucket bucket plate and support plate bucket to enhance, and equipped with high wear resistant auxiliary knife plate, high wear resistant cast tooth, thereby improving the service life of the whole bucket.

Four

Side dump.

The side dump is generally used as a tunnel. Because the tunnel is small, sometimes the mixing station will be used. There is no shelter on both sides of the side unloading, which is convenient for dumping. The working device is controlled by a hydraulic system near the bucket and can be left and right.

The side dump bucket is a working device for the small field, especially the tunnel working condition. The bucket can be one-way rollover, which can effectively reduce the labor intensity of the driver in tunnel operation.

Five

Grips

We use less of this. It seems to be a place where mushrooms are used. It is mainly applied to plant stalks and other gripping. It has the characteristics of big opening, tight compaction and high gripping efficiency. Generally, grass is very light, and it can catch a lot.

Six

Fork mounting machine

The fork loader is not the bucket of the loader, but it is also a working device, which is introduced together.

It is mainly used for transportation of fork marble, which is often seen in stone factories. The machine with this kind of fork is generally very heavy. Or the tail of the car will rise.

Seven

Enlarged

The greater fight is also known as the king of the black gold. Shovel, shovel sand stone can be used for coal, or other loose conditions more often. No enlarged teeth, used to shovel loose things.

Eight

Pinch fork

The fork fork is mainly used in the handling and handling of materials in the forest farm and port, which is used to load and unload wood.