Intelligent commodity concrete mixing station is widely loved by users　　

The practice of local mixing station stores need to establish and plan, all the query plan, set the commodity concrete mixing station and planning, mainly includes the concrete mixing station construction site selection and proper selection of equipment and equipment.

Local mixing station shopping malls need to query, analyze and clean up: preparation investment plan mixing station, before deciding capital investment plan, first of all, to do a careful and local investigation of the local market. If the construction part is used, the production capacity of the mixing station should be decided according to the construction capacity and the amount of commercial concrete. Such as highway or small (1 years period) project, usually choose capacity of 1 ~ 1.5 m3 mixer host. Such as commercial concrete mixing station, should be based on the situation of economic development in the region, the area of commercial concrete estimated demand and contribution to the resolution of commercial concrete mixing station, big and small, usually used for mixing the host capacity of more than 1.5 m3.

Now many people think that since concrete mixing station and concrete mixing plant are concrete equipment, then there is no big difference, most of them are just a big one, a small one, a high one short. In fact, otherwise, but what is the difference between these two sets of equipment? We will simply introduce.

First of all, the difference between concrete mixing station and mixing building system: mixing station has five systems, such as material supply system, metering system, mixing system, electrical control system and so on. And the mixing building is relatively simple.

The second is the aggregate mixing building on aggregate by measuring directly to the mixer; mixing and aggregate station below, after the need to pass through the aggregate measuring inclined belt (also part of the use of lifting machine) into the mixer after transmission. Popular point of view, that is, once the ascension of the aggregate is called the building, the two upgrade is called the station. Because the aggregate bin of the mixing building is above, the steel structure will be larger, and the inclined belt will be relatively longer. But the productivity of the mixing tower is about 1/5 higher than that of the mixing station in terms of productivity.

During the operation, the energy consumption and failure rate will increase due to the frequent lifting of the inclined belt of the mixing station, while the energy consumption and failure rate of the mixing plant are relatively low.

Because of the mixing station production capacity of small structure, easy disassembly, can be composed of container transfer sites, applicable to the construction site; and mixing building of large volume, high productivity, only as a fixed type stirring device, suitable for large-scale water conservancy projects or the output of the commodity concrete supply.

So when customers distinguish concrete mixing station and concrete mixing building, from the aggregate (material) lifting frequency, production efficiency and other aspects, to choose the right equipment.