Engineering machinery equipment loading and unloading safety matters needing attention

Sometimes, the construction machinery and equipment will need to be towed to transport, and at this time, equipment in the process of loading and unloading also have matters needing attention, in order to hit the safety of the mind, or to learn.

(1) when loading, as far as possible not in the large flow of people, it is best to use some of the slope of the platform, and do some anti slip measures. At the same time to observe the surrounding environment, so as to avoid the occurrence of pedestrian collision.

(2) if you can not avoid the flow of people and places, we must set up eye-catching signs in the point of loading of 30-50 meters, and there must be someone to intercept vehicles and pedestrians around, to avoid collision, scratching accident.

(3) in the process of loading and unloading the car, slope without place to use all available items such as sleepers, build slope platform, slope must be stable, set up items to make use of some high hardness and no sharp and large friction objects to avoid slipping or damage the tire, build a platform for the best angle in 15 - 30 degrees.

(4) in the process of loading and unloading the car, the driver must control the speed, the car speed, and must cooperate closely with the commander on the ground, the driver should always pay attention to and obey the command staff password. Ground personnel should always pay attention to vehicle conditions and surrounding conditions, put an end to equipment and pallet scraping and other unsafe phenomena.

(5) after the equipment is installed, flameout and stop, and do the relevant brake and brake work according to the different brake devices. The use of some items such as good sleepers fixed on the rotor wheel, sleeper milling machine and regeneration machine, to prevent contact with the rotor trailer, causing deformation of the tool, injury accidents such as tray.

(6) to help the tractor driver to use the chain and other objects fastening equipment, must lock the equipment, lock stable. Special attention should be paid to: in the fixed process, we must pay attention to the vehicle cylinder, pipeline and some parts of the line vulnerable to damage, not to allow steel wire rope and other fasteners and collisions and friction.

(7) if the rain and snow loading around the muddy roads, equipment tire and the ladder when the lack of friction or slope discomfort, at this time, on the very strong equipment is prohibited. Anti slip or some improvement measures must be done. And the driver in the process of moving slowly, always pay attention to the command of the ground command, obey the command, put an end to the occurrence of rollover, scraping and other serious accidents.

(8) when the loading work is finished, the driver should do a comprehensive inspection of the vehicle, whether the equipment brake work is done well, whether the door is locked, and whether there are still missing links.

Human life only once, so when dealing with these monsters, must not be taken lightly, seriously loading and unloading, safe home.