Maintenance and maintenance of mechanical transmission system of roller

Construction machinery is basically engaged in field operations, poor climate conditions, poor geographical environment, which will cause serious wear and tear of the working device and walking mechanism, which puts forward higher requirements for the lubrication of the machinery. Especially the lubrication and maintenance requirements of the drive system are higher.

Today, Xiao Bian will come with you to analyze the road roller mechanical transmission system maintenance methods, there is a need for friends, may wish to learn about.

The mechanical transmission system of roller including transfer gear, gearbox, drive axle, wheel vibration reducer, excitation mechanism, and the side gear mechanical transmission roller used and drive chain, they need to use gear oil. For closed lubricating transmission, check the oil level and lubricate the oil regularly, and wash regularly and make more yellow fresh oil. The following principles shall be observed when checking, discharging and fueling:

1, check the oil level in the non rotating drive components under the condition of oil spill and avoid the oil level detection is not accurate.

2, before lubricating oil emissions, should start the roller warm oil, so that hot oil flow quickly, the box of impurities, dirt more easily mixed with oil emissions.

3, when the rollers change oil, stop the engine. When the need to work in the car, must be front and rear wheel chock wooden block.

4, check the oil level and oil change, roller should be placed horizontally.

5, before removing the oil plug, should first scrub its outer surface and surrounding surface dirt. Clean the oil plug before it is cleaned so as to avoid lubricating oil pollution.