Roller operating knowledge, excellent machine hand understand        

Roller is heavy and can not be driven without professional operating skills. Therefore, as a roller must know how to operate the common sense of the road roller, so as to work in a good state, as far as possible to ensure their own and other people's personal safety.

Firstly, the operating personnel must certificates, shall not leave their positions in the work process, no operation and operation certificate is not consistent with the mechanical. It is strictly forbidden to give mechanical equipment to operators without the operation certificate of this type of aircraft. Never drink before you drink;

Two, before each work, to check whether the lubricating oil, fuel and water is sufficient, all kinds of instruments are normal, the transmission system, working device is intact, hydraulic system and the pipeline and other non leakage phenomenon, after confirmation of normal, can start;

Three, operators must comply with the instructions of the machine, strictly implement the inspection system before work, and pay attention to observation and work after the inspection and maintenance system;

Four, cab or operating room should be kept clean, no flammable, explosive, flammable goods. Wearing slippers, smoking and drinking are strictly prohibited. Mechanical belt fault operation or overload operation is strictly forbidden;

Five, mechanical equipment in the construction site parking, should choose a safe parking place, lock the cab (operating room) door, to pull the parking brake. When stopping on the ramp, use a triangular wood or stone against the wheel. There should be special attendance at night;

Six, the mechanical cooling water, when the temperature is below 0 DEG C, the work should be timely discharge, or take other measures to prevent cracking antifreeze, body;

Seven, construction, must first identify the underground obstacles, and send special personnel responsible for directing the construction of machinery, to ensure the safety of underground obstacles and machinery and equipment;

Eight, before the operation, the driver and the construction team leader must have a comprehensive study and understanding of the content disclosed by the technical director, and should promptly inquire when they are not clear or unclear. The operation of drivers and construction team should always keep the workplace underground, ground and air barrier type, location (including: the excavation of the filling height, slope, underground cables, wire around height, various pipelines, pits and various obstacles, etc.) in the position of construction must follow the construction team the command is strictly prohibited without direct operations;

Nine, during the operation, non construction personnel are prohibited to enter the construction area, construction personnel into the construction site, strictly chasing slapstick;

Ten, person, machine with the construction, working personnel are not allowed to stand in front of the machine, must stand outside the mechanical working face, need roller when manual cleaning wheel with artificial soil, should clean up in the back of the roller, no cleaning roller along the reverse direction back when, to prevent tripping personal casualty accidents.

As an excellent hand machine, book knowledge must be learned, but more important is to master the practical experience, I hope everyone can learn and use, flexible use.