Vibratory rollers should be used this way

The operation problems of vibratory roller in the course of using, need to pay attention to the machine hand, and timely maintenance and maintenance. Roller use frequency is higher, the workload is greater, safety must be done well.

According to the majority of working habits and common vibration roller fault, the following is a summary of the basic safety operation, for your reference.

Speed and commutation should be stopped first, and the speed of internal combustion engine should be reduced when the speed change.

1., the roller should start before the earthquake, the internal combustion engine should be in the medium speed, and then modulate the high speed.

2. when rolling, the vibration frequency should be consistent. For the adjustable vibratory roller, the vibration frequency should be adjusted before operation, and the vibration frequency should not be adjusted without any vibration.

You should not use the fast gear when you are on or off the 3. In turn, including articulated vibratory roller in small turning round rolling, prohibited the use of fast file.

4. no road roller is allowed to vibrate on the solid ground.

5., the first stop vibration should be stopped, and then the reverse mechanism in the middle position, the transmission is placed in neutral, and finally pull hands brake control rod, the internal combustion engine idling operation after several minutes flameout.

6. when rolling soft roadbed, it should be rolled 1~2 times without vibration, then vibrating and rolled.

The adjustment of the 7. reversing clutch, the shock clutch and the brake shall be carried out after the main clutch is disengaged.

8. roller shall not engage in vibration when driving at high speed.

9. other operating requirements should comply with the requirements of hydrostatic roller.