Different ABG8820 paver whole Caterpillar board       

As a dry engineering machine, we all know the caterpillar bar. As we all know, the form of track plate has great influence on mechanical attachment, traction performance and other performance. According to different uses, the structure forms of the Caterpillar board are generally divided into the following.

(1) general Caterpillar board. It has a height of 20-80 mm, and the high tension single track track plate (Figure 1-23 (a) has good traction performance, but when the machine is steering, the resistance of the track is large, and the damage to the ground is also large. It is mostly used for machinery requiring high traction force. The double stiffened crawler board (Figure 1-23 (b) has a large rigidity, and has good traction and steering performance, and is used for the machine on the loader. The three track crawler board (Figure 1-23 (c) has low crawler stings, easy steering, but poor traction performance, which is used in a type of excavator, which requires less traction.

2. A crawler board (Figure 1-23 (d), which is a crawler plate with side slip and reinforcement on both sides.

3. The wetland Caterpillar board (Figure 1-23 (E), which is a triangular Caterpillar board. It can change the ground area with the soft and hard soil, so it has good performance, good self cleaning, no mud on the track, and can climb the slope. It is mainly used in the wetland bulldozer. The width of the track plate is generally 50-60 cm, but the width of the wetland track plate is generally more than 70 cm. A super low specific pressure crawler bulldozer has a specific pressure of 14 kPa (0.14 kgf/cm2). The two ends of the triangular track plate lengthened, which increases the width of the track plate to 150cm.

Caterpillar classification

Construction machinery house - Caterpillar board

The Caterpillar board material of the home paver of the construction machinery is made of 25MnB+ imported rubber. The surface of the product is coated with black paint and the thickness of the film is more than 80 u m.

3 characteristics of the Caterpillar board

Size standard

The connection size of the caterpillar plate and the rubber plate and the surface hardness of the steel plate are in accordance with the relevant standards of the industry. There is no crack in the forging of the steel plate.

Fine processing

Each batch has a chemical analysis report. The crawler plate is treated with paint, and the joint surface is smooth.

Perfect design

Rubber plate used for oil, asphalt, corrosion resistance, resistance to diesel, wear resistance, no cracks in the rubber plate, local falling phenomenon.

Go to our website http://www.700618.com/, and you will know more about it.

ABG8820 paver whole Caterpillar board Real photograph

Our matching vendor recommends

(in this article the original article is copyrighted to the construction machinery house all if the reprint, please indicate otherwise.)