The function of balance beam: balance beam is also called iron pole. It can be used to maintain the balance of the lifted equipment, avoid the damage of the equipment by the sling, shorten the height of the sling, reduce the lifting height of the movable pulley, and reduce the horizontal pressure of the equipment when lifting, so as to avoid damage to the equipment.
Following is a brief introduction and knowledge sharing of our company on SANY SMP100C Balance Beam for Paver series issues:
10. Type of Balanced Beam?
Answer: Type of balance beam: 1. Tube balance beam: welded with seamless steel pipe, lifting lug, reinforcing plate, etc., can be used to hoist pipes, steel structural parts and small and medium-sized equipment; 2. Steel plate balance beam: for on-site processing, the thickness of steel plate is determined by the weight of equipment; 3. Steel channel balance beam: composed of channel steel, ring plate, lifting lug, reinforcing plate, bolt, etc. Its characteristic is that the lifting point of the partition board can move forward and backward, and the lifting point can be selected according to the weight and size of the equipment. It is convenient, safe and reliable to use. 4. Truss balancing beam: welded by various profiles, rings, lugs, truss rotating axles, beams, etc. When the distance of hanging point is large, the truss balance beam is usually used to increase its stiffness.
11. Are the Paver accessories produced by your company expensive?
Answer: A penny a penny a penny a penny a penny a penny a penny a penny a penny a penny a penny a penny a penny a penny a penny a penny more than three pennies a penny. Every spare part sold by our factory is absolutely superior in quality. The expensive thing is sure to be good. It gives you good products
12. Design of tubular balanced beam (axial force) 1. Structural characteristics?
Answer: Design of tubular balanced beam (axial force) 1) Structural characteristics: Horizontal angle of cable (> 60 degrees); Location of lifting lugs as far as possible; Guarantee that the suspension beam is only subjected to axial force 2) Calculation method_ (=[_]); J ([j]) External load calculation: F = K1 *K2 *Q/2 of which: Q-lifting; K1-dynamic load coefficient K2-non-uniformity factor 3) Simply supported axially compressed members at both ends should be considered. Force: _ = F/tgalpha/A [[[] Stabilizing Pressure: _ = F/tgalpha/(968;A) =[[A][[[A] stability coefficient_is related to sleslesleslesleslenderness ratio lamlama: 968;=1-alpha1 *lamlamlamlamlamlamlamlambda n2 lamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlamlambsqrt (s/E)/pi=[[[(alpha1+alpha2lamlamlamlamlamlamlamlamlamlamlamlamlamlamlamn & sup2;]/2 lambda n & sup2; lambda n > 0.215
13. Is the quality of Paver accessories guaranteed?
Answer: The Paver accessories sold by our company are guaranteed for one year. The quality of the paver parts imported and manufactured is absolutely reliable. If you have any questions, you can call our hotline to answer them in detail.
The company's SANY SMP100C Balance Beam for Paver quality stability, adequate supply assurance by major users and construction units throughout the country unanimously recognized. Welcome to call us!
Disclaimers：
If there is any infringement of the product on this page, please contact us to delete it! Contact number: +8618705218934
.jpg)
