Fixed position assembly of mechanical assembled ironing plate includes vibrator assembly, bottom plate assembly, frame assembly, base segment assembly and lengthening segment assembly. Vibrator assembly is to assemble connecting rod, support, vibration shaft, vibration beam and so on. Base plate assembly means high frequency welding of the base plate and the bolts of the extended section. Frame assembly includes base plate heating components, base frame and base plate, hinge of base segment, base plate heating components of lengthened segment, and assembly of lengthened segment frame and base plate. The assembly of the foundation section includes the assembly of the foundation frame and suspension system, the vibration system of the foundation section, the vibration system of the foundation section, the hydraulic pipeline of the foundation section and the cover plate of the foundation section. The assembly of the lengthened section includes the vibration tamping system of the lengthened section, the vibration system of the lengthened section, the cover plate of the lengthened section and the assembly of the lengthened section.
Below is a brief introduction and knowledge sharing of our company on Paver accessories series.
4. Details of ironing plate?
Answer: The ironing plate of each type of paver has a basic width, that is, the minimum width. This basic width is about 2m for the minicomputer and slightly larger than 3m for the mainframe. If the width of the paving layer is less than the basic width of the ironing plate, it is difficult to spread; if it is larger than the basic width, it can be spread by widening the ironing plate. The ironing plate widening is not unlimited. At present, the maximum width of the ironing plate of the paver is up to 12m, and the wider the road surface, the paver has to use the method of longitudinal joints to pave separately, or use multiple pavers to work in a trapezoidal formation at the same time.
5. How about the quality of your SANY LTU90S Floor Plate for Paver?
Answer: The quality of ironing plate of paver sold by our company is absolutely reliable. The material used is imported material, which makes you feel at ease to buy. For details, please call us to answer the products you need.
6. What should we pay attention to when combining the width of the ironing plate?
Answer: When combined ironing plate width, it should also take into account that the longitudinal joint is best located on the longitudinal marking line of the road surface, and try not to set it in the middle of the main lane. When widening the ironing plate, the principle of symmetry should also be obeyed, that is, the combined ironing plate should be as symmetrical as possible to the longitudinal axis of the paver. Otherwise, the paver will be easily deflected due to unequal left and right resistance. In order to maintain its direction along the road, the driver has to operate frequently, which endangers the smoothness of the pavement. In the construction of multi-layer pavement, attention should also be paid to avoid overlap of longitudinal joints between upper and lower layers.
The company's SANY LTU90S Floor Plate for Paver quality stability, adequate supply assurance by major users and construction units throughout the country unanimously recognized. Welcome to call us!
Disclaimers：
If there is any infringement of the product on this page, please contact us to delete it! Contact number: +8618705218934
.jpg)
