The key points of ironing knowledge: the start of the first paving of an asphalt layer and the start of the docking of the already paved layer. The former shall drive the paver to the paving place, and place the front edge of the ironing plate at about 10 cm behind the paving line, and support the ironing plate with at least two boards of the same thickness as the thickness of the layer; the latter shall place the ironing plate on the already paved layer and parallel the front edge of the ironing plate with the interface, and the underlying thickness shall be equal to the difference between the thickness of the loose paving and the compacted thickness of the paved layer.
Below is a brief introduction and knowledge sharing of our company on Paver accessories series.
3. Is the heavier the ironing plate of the paver, the better?
Answer: The heavier the paver ironing plate, the better: it has nothing to do with the weight. Of course, the preliminary compaction effect of the heavy ironing device will be better when both vibration and vibration are opened at the same time, but it is very limited. Moreover, the weight of the real ironing plate does not have much effect on this.
4. Details of ironing plate?
Answer: The ironing plate of each type of paver has a basic width, that is, the minimum width. This basic width is about 2m for the minicomputer and slightly larger than 3m for the mainframe. If the width of the paving layer is less than the basic width of the ironing plate, it is difficult to spread; if it is larger than the basic width, it can be spread by widening the ironing plate. The ironing plate widening is not unlimited. At present, the maximum width of the ironing plate of the paver is up to 12m, and the wider the road surface, the paver has to use the method of longitudinal joints to pave separately, or use multiple pavers to work in a trapezoidal formation at the same time.
5. How about the quality of SANY SMP165 Floor Plate for Paver?
Answer: The quality of ironing plate of paver sold by our company is absolutely reliable. The material used is imported material, which makes you feel at ease to buy. For details, please call us to answer the products you need.
6. What should we pay attention to when combining the width of the ironing plate?
Answer: When combined ironing plate width, it should also take into account that the longitudinal joint is best located on the longitudinal marking line of the road surface, and try not to set it in the middle of the main lane. When widening the ironing plate, the principle of symmetry should also be obeyed, that is, the combined ironing plate should be as symmetrical as possible to the longitudinal axis of the paver. Otherwise, the paver will be easily deflected due to unequal left and right resistance. In order to maintain its direction along the road, the driver has to operate frequently, which endangers the smoothness of the pavement. In the construction of multi-layer pavement, attention should also be paid to avoid overlap of longitudinal joints between upper and lower layers.
The company's SANY SMP165 Floor Plate for Paver quality stability, adequate supply assurance by major users and construction units throughout the country unanimously recognized. Welcome to call us!
Disclaimers：
If there is any infringement of the product on this page, please contact us to delete it! Contact number: +8618705218934
.jpg)
